Description
Product details
Monitor Performance Starts with Driver Excellence A monitor’s drivers are the heart and soul of its performance. Driving the low-end and midrange, BX5-D3’s 5-inch military-grade Kevlar® woofers are rigid and lightweight, delivering outstanding transient response whist negating unwanted “cone breakup.” BX5- D3’s treated silk dome tweeter provides the perfect combination of low mass and the absence of audible resonances that plague conventional tweeters. Together, the BX drivers deliver critical detail, nuance and dynamic accuracy, so your mixes have the veracity and transparency you demand. More Than Just an Enclosure With M-Audio’s BX5-D3, every detail has been meticulously engineered with one goal in mind - to facilitate the freedom to mix with confidence. BX5-D3 monitors have a rear- mounted bass port, meticulously engineered to the exact length and diameter. The result? Deep, defined bass response with maximum bass extension and resolution. When combined with a smoothly-flared port, BX5-D3 monitors markedly reduce the audibly-intrusive air turbulence that results when bass is played back at high sound pressure levels (SPLs). BX5-D3’s tweeter is mounted in a custom waveguide for reliably accurate dispersion that eliminates unwanted high-frequency “scatter,” whilst ensuring a soundstage that remains consistently wide and stable. For seamless setup and easy-location of the optimum listening position, the BX5-D3’s front-mounted positioning LED shines brightly when you’re located in the perfect listening spot, for uncompromisingly accurate and reliable critical evaluations. Finally, BX5-D3’s iconic design on the front panel—M-Audio’s famous “keyhole” shape—is more than just an attractive look: This special “fastenerless” design ensures so there are no driver attachment screw heads to interfere with the sound coming from our drivers. Key Features - 1. Bi-amplified design with 100 watts (60 LF, 40 HF) for powerful, accurate sound 2. 5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround 3. 1” natural silk dome tweeter delivers superb transient details 4. New computer-optimized tweeter waveguide for precise imaging 5. Acoustic Space Control to fine-tune low-end response to your room 6. Optimized rear port for extended low-frequency response 7. XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more 8. Volume control enables you to dial in the perfect monitor playback level 9. Ultra-wide range 52-35kHz frequency response covers full musical spectrum 10. Front panel LED shines brightly when speaker is positioned at ideal monitor angle SPECIFICATION - Type - 2-way near-field studio reference monitors Low Freq. Driver - 5 inch (127mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded High Freq. Driver - 1 inch (25mm) magnetically shielded natural silk dome Frequency Response - 52 Hz – 35 kHz Crossover Frequency - 2.5kHz Low Freq. Amplifier Power - 60W High Freq. Amplifier Power - 40W Maximum Peak - SPL 110 dB SPL - Full Bandwidth Pink Noise Measured Input Sensitivity - -10dBU Input Connectors - 1x XLR balanced input connector 1x TRS balanced/unbalanced input connector Input Impedance - 10kΩ balanced, 20kΩ unbalanced Polarity - Positive signal at + input produce outward LF cone displacement Protection - RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse Power Voltage : - 100–120V, 50/60 Hz / 220–240V, 50/60 Hz Consumption: 100W Fuse - 220–240V~ T1AL 250V / 100–120V~ T1.6AL 250V Cabinet -Vinyl-laminated high-acoustic-efficiency MDF Dimensions - (width x depth x height) 6.9” x 7.8” x 10” / 176 x 197 x 254 mm Weight - 12.3 lbs, 5.6kg
